Mini PCB milling drilling machine ZK-6060(600*600*100mm)
Samples of Mini PCB milling drilling machine:
Feactures of Mini PCB milling drilling machine:
1, Small and good looks structure.
2, Stepper motor and leadshine driver ,higher precise,working
stable.
3, PCI Nc-studio control system ,support same position continue
,when tools/power filure.
4, Protel99 for designing the Circuit board ,Coppercan design the tools working path.
5, Easy operate,higher precise ,mini style.
6, If Change the software into artcam,type3,or ucancam,this machine
also can do wood & metal cutting and engraving.
7, We have our own factory ,can design the machine as your
requirment.
Application of Mini PCB milling drilling machine :
1,Learn complete the production of single and double panel, help
students master the system board process
(cutting boards,carving,drilling,overhole plating).
2,Do EDA practice, electronic design, course design, graduation
design, innovative practices,integrated design
, innovative experimental .
3,Provide the necessary conditions for students independent learning,
cooperative learning, research study.
4,Learn mechanical plate design :such as process design, prototype
production of the whole process.
5,Electrinic plate design :design the PCB plate,can be used for
industry.
Parameter of Mini PCB milling drilling machine :
Items | Parameter |
Spindle power | 1.5KW water cooling spindle |
X,Y,Z axies working size | 600*600*100mm |
Spindle speed | 0-24000rpm/min |
Empty travelling speed | 0-8000mm/min |
Engraving speed | 0-6000mm/min |
Machine accuracy | 0.03mm |
Resetting accuracy | 0.05mm |
Diagonal error | 0.5mm |
Resolution ratio | 0.005mm |
Moving method | Platform moving |
Machine’s structure | Whole cast aluminum |
Working table | Aircraft aluminium T slot with PVC layer |
Guide rail | BSR liner round rail |
X,Y,Z axies Transmission | Taiwan TBAI Ball screw (X Y Z-axis: #1605) |
Driving system | Stepper motor and leadshine driver ( XYZ-axis: 57BYG-311) |
Tool collet type | ER 11 |
Suitable tools diameter | 3.175mm, 4mm, 6mm |
Control system | PCI Nc-Studio (Options:Mach3 ,DSP offline) |
Designing software | Protel 99, Copper CAM |
Minimum line diameter | 6-8mil |
Minimum line spacing | 8mil |
Minimum step distance | 0.003125mm |
Motor wire | High soft specially for Numerical Control( 4*0.75) |
Spindle wire | Shielding high soft (3*1.5) |
Carving Instructions | G code *Uoo *mmg *plt HPGL |
Running environment temperature | 0-45 °C |
Relative humidity | 30%-75% |
Voltage | 220V ,50/60Hz,single phase |
Certificate | CE |
Tools | Total 24 pieces, 10 pieces drilling tools, 10 pieces engraving tools, 3 pieces corn milling tools, 1 piece bottom clearance tools |
Accessories | Water pump(1), tools (24), power line, USB line, fixtures(4), user manual,software CDs, Ncstudio card(1), spanners(2), brush,collets(3),double faced adhesive tapes (2), etc. |
Your enquiry is welcome !!
